Skip to content

Our Insights

Dynamic Solutions to elevate the buildings, occupants, and communities we serve.
Expert Articles For

Facility Optimization

  • Nick Muscolino
  • August 17th, 2026

Healthcare Ventilation Compliance: Testing to Monitoring

Healthcare ventilation compliance means meeting NFPA 99 and ASHRAE 170 requirements for air pressure, air changes, temperature, and humidity in critical spaces, verifying those conditions through scheduled testing, and increasingly, confirming them around the clock with continuous monitoring instead of only on test day.

Waiting room with reception in medical clinic

Recent Articles

Flat geometric split illustration comparing HVAC testing and balancing field measurement with building commissioning controls verification, side by side.
Testing and Balancing, Commissioning, Building Performance, New Construction

TAB vs. Commissioning: What's the Difference, and Do You Need Both?

Testing, adjusting, and balancing (TAB) verifies that airflow and water flow through a building's HVAC equipment match...
Read more
Flat geometric illustration comparing occupied and unoccupied HVAC airflow states in a hospital operating room ceiling, showing a laminar flow diffuser, occupancy sensor, and automated turndown control.
Testing and Balancing, Healthy Buildings, Commissioning, Utility Rebates, Building Performance, Compliance

ASHRAE 90.1's New OR Turndown Mandate: What Hospitals Need to Know

ASHRAE/IES Standard 90.1's Addendum bh, approved April 30, 2025, requires operating rooms, surgical cystoscopy rooms,...
Read more
Flat geometric illustration of a commercial hydronic HVAC balancing loop showing a pump, balancing valve with differential pressure gauge, and coil connection between a central plant and air handler.
Testing and Balancing

Hydronic System Balancing: What It Is, How It's Tested, and Why It Matters

Hydronic balancing is the process of measuring and adjusting water flow through a building's heating and cooling piping...
Read more
need to create an image: A flat, geometric technical illustration of a VAV (variable air volume) terminal box, shown as a clean cutaway diagram of the rectangular sheet-metal casing only: a round or oval inlet duct connection at one end, an internal damper blade on a shaft with an actuator mounted on the casing exterior, and a velocity/airflow sensor pickup just downstream of the damper. Discharge side shows a short duct stub only — no grille, no diffuser, no ceiling tile in contact with the box. The box floats in an open ceiling plenum space, with a technician's hand holding a separate handheld digital airflow meter near the discharge duct stub (not touching or mounted to the box). Background: a faint architectural wireframe of a glass skyscraper interior, straight edges, drafting-line style, in Aero Dark Blue ( #043659) with light wireframe strokes. Overlay 3–4 flat hexagon shapes in Aero Light Blue ( #00A9E0), Hill Blue ( #005EB8), and Aero Orange ( #ED7D31), some solid-filled, some outlined, clustered in a corner. Aero Orange highlights the sensor or a small out-of-range indicator on a simple line graph in the corner. Flat, solid color fills only — no gradients, no glow, no drop shadows, no photorealism. Do not depict a diffuser, grille, or register attached to or built into the VAV box itself. Clean vector/illustration style, high contrast, no text, no logos.
MBCx, Testing and Balancing, Commissioning, Building Performance

Why Do VAV Boxes Fail Without Tripping a BAS Alarm?

A VAV box can run out of design tolerance for months without ever generating a building automation alarm, because most...
Read more
HVAC duct leakage testing by Aero Performance Group technician using airflow measurement equipment to validate duct system performance, energy efficiency, and SMACNA compliance in a commercial building.
Testing and Balancing, Commissioning, Building Performance, New Construction

How Is Commercial Duct Leakage Tested, and What Do the Codes Require?

Commercial duct leakage testing pressurizes a representative section of installed ductwork with a calibrated fan and...
Read more
Hospital Hallway
MBCx, Critical Environment, Testing and Balancing, Healthy Buildings, Life Safety, Compliance

Healthcare Ventilation Compliance: Testing to Monitoring

Healthcare ventilation compliance means meeting NFPA 99 and ASHRAE 170 requirements for air pressure, air changes,...
Read more
Fire damper technician inspecting damper
Critical Environment, Life Safety, Fire Dampers

Fire & Smoke Damper Testing: It's Not Optional

Fire and smoke dampers are required by NFPA 80, NFPA 105, and the International Fire Code to be tested one year after...
Read more
looking at buildings from a park
MBCx, IAQ, Healthy Buildings, Commissioning, Utility Rebates, Building Performance

LEED v5 Commissioning Guide: Commissioning, Monitoring-Based Commissioning (MBCx), and Retro-Commissioning Explained

LEED v5 places significantly greater weight on verified, ongoing building performance, making commissioning,...
Read more
photo of businessman looking at cogwheels
MBCx, IAQ, Healthy Buildings, Commissioning, Utility Rebates, Building Performance

What Your BAS Isn't Telling You (And What It's Costing You)

A Building Automation System monitors equipment, but it doesn't diagnose inefficiency. A BAS can show "normal"...
Read more
Testing and Balancing, IAQ, Healthy Buildings, Building Performance

Testing and Balancing (TAB): What It Is, Why It Matters, and How It Impacts Building Performance

What is testing and balancing in HVAC? Testing, Adjusting, and Balancing (TAB) is a systematic process used to measure,...
Read more
Elevate Your Building.

Take the first step.

Get Your Quote.

Have a need?  We are there for you.  One of our trusted advisors will work to provide a full scope and pricing for your needs.